This 500g brown wood filler is a premium quality ready mixed wood filler based on acrylic dispersion. Can be overpainted. Dries smooth and is crack resistant. Uses: For filling gaps and cracks in wood.

Surface Preparations: Application temperature +5°C to +40°C. All substrates must be clean, dry, and free of grease and dust. Application Instructions: Surfaces must be clean, dry and free of grease and dusts. Stir well and apply directly from the bucket with spatula spreader. Press the filler into the repair to a maximum depth of 9mm. For deeper cavities, apply in layers and allow each to dry. Care should be taken at this point not to saturate the surface as this will delay drying.

Cleaning: Tools should be cleaned after use with water. Sealant can be cleaned with water and soap before curing Limitations: Not suitable for continuous exposure to water.

Not suitable for PP, PE, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates. Keep out of reach of children. Wash skin thoroughly after handling. Wear protective gloves /eye protection/face protection. Dispose of CAUTION: contents/ container in accordance with local regulation. Safety datasheet available on request. Bathe the eye with running water for 15 minutes. irritation persists seek medical attention.

Description

This 500g brown wood filler is a premium quality ready mixed wood filler based on acrylic dispersion. Can be overpainted. Dries smooth and is crack resistant. Uses: For filling gaps and cracks in wood.

Surface Preparations: Application temperature +5°C to +40°C. All substrates must be clean, dry, and free of grease and dust. Application Instructions: Surfaces must be clean, dry and free of grease and dusts. Stir well and apply directly from the bucket with spatula spreader. Press the filler into the repair to a maximum depth of 9mm. For deeper cavities, apply in layers and allow each to dry. Care should be taken at this point not to saturate the surface as this will delay drying.

Cleaning: Tools should be cleaned after use with water. Sealant can be cleaned with water and soap before curing Limitations: Not suitable for continuous exposure to water.

Not suitable for PP, PE, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates. Keep out of reach of children. Wash skin thoroughly after handling. Wear protective gloves /eye protection/face protection. Dispose of CAUTION: contents/ container in accordance with local regulation. Safety datasheet available on request. Bathe the eye with running water for 15 minutes. irritation persists seek medical attention.